الكورس التاني لبرنامج CAMWorks لجميع المهندسين

السلام عليكم 🙂

و كما وعدتكم المرة السابقة ..

الجزء الثاني والأهم لبرنامج CAMWorks , 

 

و المرة دي عن جزء التفريز أو الفرازة او ال Milling .. أيّاً كانت  ^_^ .. 

البرنامج مهم جداً لمهندسين قسم إنتاج و ميكانيكا , و هو خاص بعمليات القطع .. و في برامج شبهه كتير زي SolidCAM مثلاً , لكن ده أسهل بكتير و طريقة الشرح حتخليك مندمج معاه

الجزء الأولاني من الكورس اهو موجود حصري على مدونة دوغري من هنا و هو الجزء المتعلق بالخراطة او Turning : http://goo.gl/1OuexI

الجزء التاني مكون من 54فيديو كل فيديو من دقيقتين لثلاث دقائق .. يعني مايكملش تلات ساعات على بعض .. ودي ميزة له لأنك في وقت شغلك او دراستك محتاج حاجة سريعة و مفصلة .

البرنامج بيهتم بماكينات الCNC و بيدي الكود اللي تشغلهم بيها .. و ده بيسهلك , وبيزودلك الكفاءة و بيوفر الوقت

لينك الفيديوهات ع اليوتيوب ^______^ لعيونكم فقط :-

 

http://goo.gl/cGifzw

مكونات الكورس :-

 1-1 Introduction – CAMWorks Interface (Milling) (CAMWorks Tutorials) 

 1-2 Introduction – Process Overview (Milling) (CAMWorks Tutorials) 

 2-1 Axis Milling -Introduction (Milling) (CAMWorks Tutorials) 

 2-2 Axis Milling – Define the Machine (Milling) (CAMWorks Tutorials) 

 2-3 Axis Milling- Define the Stock Bounding Box (Milling) (CAMWorks Tutorials) 

 2-4 Axis Milling- Define the Stock Sketch (Milling) (CAMWorks Tutorials) 

 2-5 Axis Milling – Automatic Features (Milling) (CAMWorks Tutorials) 

 2-6 Axis Milling- Interactive Features (Milling) (CAMWorks Tutorials) 

 2-7 Axis Milling -Generate Operations (Milling) (CAMWorks Tutorials) 

 2-8 Axis Milling – Program Zero (Milling) (CAMWorks Tutorials) 

 2-9 Axis Milling – Generate Toolpaths (Milling) (CAMWorks Tutorials) 

 2-10 Axis Milling- Simulate Toolpaths (Milling) (CAMWorks Tutorials) 

 2-11 Axis Milling- Reordering Operations (Milling) (CAMWorks Tutorials) 

 2-12 Axis Milling -Operation Parameters Tool Adjustments (Milling) (CAMWorks Tutorials) 

 2-13 Axis Milling – Operation Parameters Feeds and Speeds (Milling) (CAMWorks Tutorials) 

 2-14 Axis Milling – Adjusting Operations Roughing Options A (Milling) (CAMWorks Tutorials) 

 2-15 Axis Milling – Roughing Options B (Milling) (CAMWorks Tutorials) 

 2-16 Axis Milling -Adjusting Operations NC Parameters (Milling) (CAMWorks Tutorials) 

 2-17 Axis Milling – Feature Options (Milling) (CAMWorks Tutorials) 

 2-18 Axis Milling- Optimizing Toolpaths (Milling) (CAMWorks Tutorials) 

 2-19 Axis Milling – Contour Operations (Milling) (CAMWorks Tutorials) 

 2-20 Axis Milling – Creating Setup Sheets (Milling) (CAMWorks Tutorials) 

 2-21 Axis Milling -Post Processing Toolpaths (Milling) (CAMWorks Tutorials) 

 2-22 Axis Milling -Inserting Operations (Milling) (CAMWorks Tutorials) 

 2-23 Axis Milling-Sorting Operations (Milling) (CAMWorks Tutorials) 

 2-24 Axis Milling- Combining & Linking Operations (Milling) (CAMWorks Tutorials) 

 2-25 Axis Milling- Inserting Avoid Areas (Milling) (CAMWorks Tutorials) 

 2-26 Axis Milling- Inserting Contains (Milling) (CAMWorks Tutorials) 

 2-27 Axis Milling- Part Exercise IA (Milling) (CAMWorks Tutorials) 

 2-28 Axis Milling -Part Exercise IB (Milling) (CAMWorks Tutorials) 

 2-29 Axis Milling- Part Exercise IC (Milling) (CAMWorks Tutorials) 

 3-1 Axis Features- Introduction (Milling) (CAMWorks Tutorials) 

 3-2 Axis Features- Machinable Features (Milling) (CAMWorks Tutorials) 

 3-3 Axis Features-Face Feature (Milling) (CAMWorks Tutorials) 

 3-4 Axis Features – Pockets I (Milling) (CAMWorks Tutorials) 

 3-5 Axis Features -Pockets II (Milling) (CAMWorks Tutorials) 

 3-6 Axis Features- Pockets III (Milling) (CAMWorks Tutorials) 

 3-7 Axis Features-Bosses (Milling) (CAMWorks Tutorials) 

 3-8 Axis Features- Part Perimeters (Milling) (CAMWorks Tutorials) 

 3-9 Axis Features- Open Profiles (Milling) (CAMWorks Tutorials) 

 3-10 Axis Features- Slots (Milling) (CAMWorks Tutorials) 

 3-11 Axis Features- Holes (Milling) (CAMWorks Tutorials) 

 3-12 Axis Features- Linear Pattern Feature (Milling) (CAMWorks Tutorials) 

 3-13 Axis Features-Circular Pattern Feature (Milling) (CAMWorks Tutorials) 

 3-14 Axis Features – Engraving (Milling) (CAMWorks Tutorials) 

 4-1 Customizing CAMWorks – Introduction (Milling) (CAMWorks Tutorials) 

 4-2 Customizing CAMWorks-Adding Machines (Milling) (CAMWorks Tutorials) 

 4-3 Customizing CAMWorks- User Defined Strategies A (Milling) (CAMWorks Tutorials) 

 4-4 Customizing CAMWorks -User Defined Strategies B (Milling) (CAMWorks Tutorials) 

 4-5 Customizing CAMWorks – Adding Tools (Milling) (CAMWorks Tutorials) 

 4-6 Customizing CAMWorks- Setting Up ToolCribs (Milling) (CAMWorks Tutorials) 

 4-7 Customizing CAMWorks-Linking the Database (Milling) (CAMWorks Tutorials) 

 4-8 Customizing CAMWorks – Restoring the Database (Milling) (CAMWorks Tutorials) 

 4-9 Customizing CAMWorks- CAMWorks Options (Milling) (CAMWorks Tutorials)

أتمنى إني أكون أفدتكم , فنحن لا نعمل الخير إلا لله و جزانا اللّه و إياكم كل خَير ^_^ 🙂

A full CAMWorks (Solidworks Based software) Tutorials

Hello, This blog will post CAMWorks tutorials … We’ve chosen this software because of its importance and its rareness on YouTube & Vimeo

So , I hope we together succeed in our goal , to quench our thirst to improve our career

This is Course Contents :- 

 

A-Turning

1-

 

1-1 Introduction -CAMWorks Interface (CAMWorks Tutorials)

 

1-2 Introduction -Process Overview (CAMWorks Tutorials)

 

2-1 Turning – Introduction (CAMWorks Tutorials)

 

2-2 Turning – Define the Machine (CAMWorks Tutorials)

 

2-3 Turning- The Setup Tab (CAMWorks Tutorials)

 

2-4 Turning – Define the Stock Bar Stock (CAMWorks Tutorials)

 

2-5 Turning – Define the Stock Revolved Sketch (CAMWorks Tutorials)

 

2-6 Turning – Define Features Automatically (CAMWorks Tutorials)

 

2-7 Turning – Define Features Interactively (CAMWorks Tutorials)

 

2-8 Turning -Generating an Operation Plan (CAMWorks Tutorials)

 

2-9 Turning -Generating Toolpaths (CAMWorks Tutorials)

 

2-10 Turning -Simulate Toolpaths (CAMWorks Tutorials)

 

2-11 Turning -Tool Adjustments (CAMWorks Tutorials)

 

2-12 Turning -Roughing Options (CAMWorks Tutorials)

 

2-13 Turning -Finishing Options (CAMWorks Tutorials)

 

2-14 Turning -Rough Grooving Options (CAMWorks Tutorials)

 

2-15 Turning- Finish Grooving Options (CAMWorks Tutorials)

 

2-16 Turning -NC Options (CAMWorks Tutorials)

 

2-17 Turning-Lead In Lead Out Optins (CAMWorks Tutorials)

 

2-18 Turning – Create Setup Sheets (CAMWorks Tutorials)

 

2-19 Turning- Post Processing (CAMWorks Tutorials)

 

2-20 Turning- Inserting Operations (CAMWorks Tutorials)

 

2-21 Turning – Setting up a Chuck (CAMWorks Tutorials)

 

3-1 Turning Exercise Part Exercise 1A (CAMWorks Tutorials)

 

3-2 Turning Exercise – Part Exercise 1B (CAMWorks Tutorials)

 

3-3 Turning Exercise – Part Exercise 1C (CAMWorks Tutorials)

 

4-1 Turn Features – Face Feature (CAMWorks Tutorials)

 

4-2 Turn Features – OD Feature (CAMWorks Tutorials)

 

4-3 Turn Features – Grooves (CAMWorks Tutorials)

 

4-4 Turn Features – ID Feature (CAMWorks Tutorials)

 

4-5 Turn Features – Cutoff Feature (CAMWorks Tutorials)

 

there are still some videos are waiting to be uploaded , so stay with us and we will notify you 🙂

 

A full CAMWorks (Solidworks Based software) Tutorials

Hello, This blog will post CAMWorks tutorials … We’ve chosen this software because of its importance and its rareness on YouTube & Vimeo

So , I hope we together succeed in our goal , to quench our thirst to improve our career

This is Course Contents :- 

A-Turning

1-

1-1 Introduction -CAMWorks Interface (CAMWorks Tutorials)

1-2 Introduction -Process Overview (CAMWorks Tutorials)

2-1 Turning – Introduction (CAMWorks Tutorials)

2-2 Turning – Define the Machine (CAMWorks Tutorials)

2-3 Turning- The Setup Tab (CAMWorks Tutorials)

2-4 Turning – Define the Stock Bar Stock (CAMWorks Tutorials)

2-5 Turning – Define the Stock Revolved Sketch (CAMWorks Tutorials)

2-6 Turning – Define Features Automatically (CAMWorks Tutorials)

2-7 Turning – Define Features Interactively (CAMWorks Tutorials)

2-8 Turning -Generating an Operation Plan (CAMWorks Tutorials)

2-9 Turning -Generating Toolpaths (CAMWorks Tutorials)

2-10 Turning -Simulate Toolpaths (CAMWorks Tutorials)

2-11 Turning -Tool Adjustments (CAMWorks Tutorials)

2-12 Turning -Roughing Options (CAMWorks Tutorials)

2-13 Turning -Finishing Options (CAMWorks Tutorials)

2-14 Turning -Rough Grooving Options (CAMWorks Tutorials)

2-15 Turning- Finish Grooving Options (CAMWorks Tutorials)

2-16 Turning -NC Options (CAMWorks Tutorials)

2-17 Turning-Lead In Lead Out Optins (CAMWorks Tutorials)

2-18 Turning – Create Setup Sheets (CAMWorks Tutorials)

2-19 Turning- Post Processing (CAMWorks Tutorials)

2-20 Turning- Inserting Operations (CAMWorks Tutorials)

2-21 Turning – Setting up a Chuck (CAMWorks Tutorials)

3-1 Turning Exercise Part Exercise 1A (CAMWorks Tutorials)

3-2 Turning Exercise – Part Exercise 1B (CAMWorks Tutorials)

3-3 Turning Exercise – Part Exercise 1C (CAMWorks Tutorials)

4-1 Turn Features – Face Feature (CAMWorks Tutorials)

4-2 Turn Features – OD Feature (CAMWorks Tutorials)

4-3 Turn Features – Grooves (CAMWorks Tutorials)

4-4 Turn Features – ID Feature (CAMWorks Tutorials)

4-5 Turn Features – Cutoff Feature (CAMWorks Tutorials)

there are still some videos are waiting to be uploaded , so stay with us and we will notify you 🙂